LED: 1xCree XHP35 HI LED
Max 2000 lumens output using 1xACEBEAM IMR18650 battery
Moonlight: 1lm, 500hours, 266cd, 32m
Low: 150lms, 9hours, 6720cd, 163m
Mid: 550lms, 2hours 12minutes, 19080cd, 276m
High: 1000lms, 1hour 12minutes, 46560cd, 431m
Turbo: 2000lms, 1hour 6minutes, 90800cd, 603m
Strobe: 2000lms, 2hours 12minutes;
Working voltage: 3V to 6V
Max runtime: 500 hours
Max beam distance: 603 meters
Peak beam intensity: 90800cd
Impact resistant: 1.2 meters
Waterproof to IPX8 standard,2M
Size:155mm(length)x40mm(head dia)x25.4mm(body dia.)
Weight: 128g without battery
Aircraft grade aluminum body structure
Premium type III hard anodized anti-abrasive finish
Ultra-clear tempered glass lens with anti-reflective coating
Strobe mode for tactical and emergency use
Smooth reflector for max light output
Tactical knurling for firm grip
Streamlined body design
Intelligent highly efficient circuit board design for max per-formance and long run time
Intelligent temperature controlled light output for user safety
Specially designed for military, Law Enforcement, Self-defense, Hunting ,Search & Rescue and Outdoor activities
Click the side switch to ON/OFF,
When flashlight is ON, press and hold the side switch to cycle from Firefly-Low-Mid-High modes,
loosen then at your selected mode. Next ON will memorize the last mode you selected without replace battery.
Double click the side switch access Turbo mode and triple click access Strobe mode regardless the flashlight is ON or OFF.
Tactical Tail Switch:
Click the tactical tail switch for momentary on and constant activation at Turbo mode regardless what the status of flashlight is.
Please note if click the tactical tail switch at first, any side switch operation is useless.
When flashlight is OFF, press and hold the side switch for 3 seconds, the flashlight will be Locked after 3 times' Moonlight flashes. It is useless for side switch operation now but click the tactical tail switch still can access Turbo mode.
When flashlight is Locked, press and hold the side switch for 3 seconds, the flashlight will be Unlocked and light at Moonlight mode.
Unscrew the tail cap to insert the battery with the anode side (+ ) towards the light head, then screw the tail cap back on.
The built-in charging function charges 18650 Li-ion battery through a Micro-USB charging port, Red=during charging, Green=fully charging. .
Note:To forbid charging 2xCR123 batteries.
Please charge battery or replace battery when light flashes three times every 5 Seconds.
Note: Only when using ACEBEAM ARC18650H-310A 3100mAh battery or other brands' 20A high drian battery, the maximum output can reach 2000LM; When using a regular 18650 battery or a 2 x CR123A battery with PCB protection, the maximum output may be only 1400LM
Living in the country surrounded by woods and fields this gives me great options with a great beam throw and lumen option depending on if I'm in an open field or going through the woods.If no access to charging is available you can carry some cr 123a batteries (2)that will throw 1400 lumens.
Write your own review