Rider RX 2.0

• A fidget EDC flashlight that is perfect for everyday carry
• Utilizes one cool white 6500K LED, offering max output 1000 lumens
• Four brightness levels and an intelligent memory function
• Powered by one a customized ACEBEAM 14500 USB-C rechargeable Li-ion battery, compatible with Alkaline / Ni-MH AA batteries
• Single tail-switch control for one-handed operation
• Stainless steel 2-way clip for versatile carry
• Optical lens with double-sided scratch-resistant coating
• Integrated precision digital optics technology
• High strength and impact-resistant HAIII hard-anodized anti-abrasive and corrosion-resistant finish
• All metal body (AL6061-T6 high-quality aluminum alloy) can withstand 1.5-meter drop test
• IP68 Dust-proof and Waterproof Rating: Fully submersible to 6.5 feet for up to 30 minutes

BATTERIES
•    Included: One 14500mAh USB-C rechargeable battery
•    Compatible: 1x Alkaline / Ni-MH AA battery
SIZE
•    Length: 96mm / 3.78"
•    Head dia.: 18.6mm / 0.73"
•    Body dia.: 26mm / 1.02"
•    Weight: 65.8g /2.32oz (incl. battery)

OUTPUT

• 1 x Premium Cool White 6500K LED

Ultra-Low: 5 lumens; 58 hours 
Low: 50 lumens; 14 hours
Med: 300 lumens; 2 hours
High: 1000 ~ 600 lumens; 2756cd; 105 meters; 35s + 49min
Strobe: 1000 ~ 600 lumens; 35s + 1h40min

Max. output: 1000 lumens 
Max. beam distance: 105 meters
Max. runtime: 58 hours
Peak beam intensity: 2756cd

• What is included in the package?
  A: 
  1 x Ridex RX 2.0
  1 x ACEBEAM 14500 Li-ion USB-C rechargeable battery;
  1 x Lanyard;
  2 x O-rings;
  1 x USB-C cable;
  1 x User manual.
• How to operate?

Before first use, push down the clip, unscrew the flashlight head, and then remove the insulating film.

Step1: Push down clip	Step2:  Remove insulating film

- ON/OFF: Fully click the switch.

- Output Selection:
With the light switched OFF, half press the switch or rapidly fully click the switch for 1 second to cycle through Ultra-Low → Low → Med → High.

- Intelligent Memory Circuit:
The light memorizes the last selected output when turned on again after 3 seconds, the previously used output will be recalled.
Strobe: continuously shift mode 5 times to enter Strobe. (Strobe without memorize function)

- Battery Charging Indicator

If the battery needs to be replaced, make sure that the positive pole (+) end of the new battery towards the flashlight head when you put it in.

• May I get a glimpse of its Technical parameters?

A: 

Notice: the above-mentioned parameters have been measured in accordance with the international flashlight testing standard ANSI FL1, and are approximate and may vary from flashlights, batteries and environments.

Write your own review