• Raw Titanium finish EDC flashlight
• Utilizes one cool white 6500K LED, offering max output 1000 lumens, throw up to 124 yards (114 meters)
• 3 brightness levels with an intelligent memory function + Strobe for self-defense
• Powered by one a customized ACEBEAM 14500 USB-C rechargeable Li-ion battery
• Wide range of Voltage design 0.9V～4.2V, compatible with Alkaline / Ni-MH AA batteries
• Single tail-switch control for one-handed operation
• Stainless steel 2-way clip for versatile carry
• Optical lens with double-sided scratch-resistant coating
• Integrated precision digital optics technology provides extreme reflector for soft and balanced beam
• Physical anti-reverse connection protection, no worry about the battery anti-reverse, can better protect the circuit safety
• High strength and impact-resistant HAIII hard-anodized anti-abrasive and corrosion-resistant finish
• All metal body (AL6061-T6 high-quality aluminum alloy) can withstand 1.5-meter drop test
• IP68 Dust-proof and Waterproof Rating: Fully submersible to 6.5 feet for up to 30 minutes
LED: Cool white 6500K, 1000lm max / 114m beam
Optic: Precision digital optics
Lens: Double-sided scratch-resistant AR coating
Finish: Raw Titanium EDC
Construction: HAIII, AL6061-T6
Rating: IP68 (2m/30min), 1.5m drop resistance
Modes: 3 levels + memory + Strobe
Switch: Single tail switch
Clip: Stainless steel 2-way carry clip
| Mode | Brightness | Distance | Intensity | Runtime |
|---|---|---|---|---|
| Low | 5lm | – | – | 58h |
| Med | 150lm | – | – | 5h |
| High | 1000~230lm | 114m | 3249cd | 35s+2h 40min |
| Strobe | 1000~230lm | – | – | 35s+4h |
A :
1 x Pokelit AA Ti
1 x ACEBEAM 14500 Li-ion USB-C rechargeable battery;
1 x Lanyard;
2 x O-rings;
1 x USB-C cable;
1 x User manual.
- ON/OFF : Fully click the switch.
- Output Selection :
With the light switched OFF, half press the switch or rapidly fully click the switch within 1 second to cycle through Low → Med → High.
- Intelligent Memory Circuit :
The light memorizes the last selected output when turned on again after 3 seconds, the previously used output will be recalled.
Strobe: continuously shift mode 5 times to enter Strobe. (Strobe without memorize function)
- Battery Charging Indicator
If the battery needs to be replaced, make sure that the positive pole (+) end of the new battery towards the flashlight head when you put it in.
(battery installation)
A:
Notice: the above-mentioned parameters have been measured in accordance with the international flashlight testing standard ANSI FL1, and are approximate and may vary from flashlights, batteries and environments.
