• Raw Titanium finish EDC flashlight
• Utilizes one cool white 6500K LED, offering max output 1000 lumens, throw up to 124 yards (114 meters)
• 3 brightness levels with an intelligent memory function + Strobe for self-defense
• Powered by one a customized ACEBEAM 14500 USB-C rechargeable Li-ion battery
• Wide range of Voltage design 0.9V～4.2V, compatible with Alkaline / Ni-MH AA batteries
• Single tail-switch control for one-handed operation
• Stainless steel 2-way clip for versatile carry
• Optical lens with double-sided scratch-resistant coating
• Integrated precision digital optics technology provides extreme reflector for soft and balanced beam
• Physical anti-reverse connection protection, no worry about the battery anti-reverse, can better protect the circuit safety
• High strength and impact-resistant HAIII hard-anodized anti-abrasive and corrosion-resistant finish
• All metal body (AL6061-T6 high-quality aluminum alloy) can withstand 1.5-meter drop test
• IP68 Dust-proof and Waterproof Rating: Fully submersible to 6.5 feet for up to 30 minutes
BATTERIES
• Included: One 14500mAh USB-C rechargeable battery
• Compatible: 1x Alkaline / Ni-MH AA battery
SIZE
• Length: 94.8mm / 3.73"
• Head dia.: 18.2mm / 0.71"
• Body dia.: 17.8mm / 0.7"
• Weight: 72g /2.53oz (incl. battery)
OUTPUT
Low: 5 lumens; 58 hours
Med: 150 lumens; 5 hours
High: 1000 ~ 230 lumens; 3249cd; 114 meters; 35s + 2h40min
Strobe: 1000 ~ 230 lumens; 35s + 4 hours
Max. output: 1000 lumens
Max. beam distance: 114 meters
Max. runtime: 58 hours
Peak beam intensity: 3249cd
A:
1 x Pokelit AA Ti
1 x ACEBEAM 14500 Li-ion USB-C rechargeable battery;
1 x Lanyard;
2 x O-rings;
1 x USB-C cable;
1 x User manual.
- ON/OFF: Fully click the switch.
- Output Selection:
With the light switched OFF, half press the switch or rapidly fully click the switch within 1 second to cycle through Low → Med → High.
- Intelligent Memory Circuit:
The light memorizes the last selected output when turned on again after 3 seconds, the previously used output will be recalled.
Strobe: continuously shift mode 5 times to enter Strobe. (Strobe without memorize function)
- Battery Charging Indicator
If the battery needs to be replaced, make sure that the positive pole (+) end of the new battery towards the flashlight head when you put it in.
(battery installation)
A:
Notice: the above-mentioned parameters have been measured in accordance with the international flashlight testing standard ANSI FL1, and are approximate and may vary from flashlights, batteries and environments.
English 
中文 